In this section are detailed "how to's" that are ECOTEC related. If you would like to contribute, feel free. New threads with questions should not be posted here. Write Ups Only!
Sticky Threads
This is mainly going from my experience of how I bought my turbo setup. I am no turbo genious or god, I am just offering advice from personal...
Normal Threads
**UPDATED** Ok since i have seen no actual ecotec boost build guides with pictures i think i will start one as described in adams(NJHK) sticky...
Okay, Some people have put bigger front sway bars in their cars, and lots of people ask me how to install one in a Balt. There have been two...
(sorry about picture quality)(2008 Cobalt, all others similar) The parts youll need, the 2.4 manifold, crankcase passage seal(seal with metal...
This is my first How-To ive ever attempted :D Ok so here we go! You will need: Night Shades 1000 Grit sand paper Lower grit sandpaper ...
This thread is a how to on moving your ECU from your engine bay to the interior of your car. Necessary tools: 13mm socket 10mm socket 7mm...
I will do my best to explain, but I do not have pictures of EVERYTHING. I will try to explain the step-by-step with some added pictures along the...
Pulling the motor and head would be steps that I don't cover in this, but they make the job a bit easier. I'm also taking into consideration the...
Updated 3/14/2009 Let me start off with the normal disclaimer:If something breaks by your following this how to guide I cannot in anyway be held...
TOOLS NEEDED 10MM RATCHET WRENCH 13MM DEEP SOCKET 14MM DEEP SOCKET & BOX END WRENCH 15MM DEEP SOCKET 13MM SOCKET & OPEN BOX END WRENCH 15MM...
blew the timing in my 03 cavy...was just wondering how i would go about fixing it. i heard best way is to get a new motor...if i do have to what is...
Materials: about 5-8 hours oven Ratchet and 10 mm socket w/extension Flathead screwdriver (one you don't mind getting ruined) Six-star...
Here is a list of instructions for installing a Dual-pass Intercooler Endplate. It is highly recommended that you read all instructions before...
Here's my little "How-to" on changing cams in the Ecotec motor using the cam tool. I've done cams twice, once with the tool and I messed it and had...
So after scoring free Prothane inserts from Scott at CPP for sending in my stock mounts. I spent about 2 hours installing these. Tools needed:...
This write up explains how to install an aftermarket transmission cooler on an automatic transmission vehicle. The vehicle used in this write up is...
Its known that the Ic Pump fails on the Cobalt SS and Ion redline. As well as the svt lightning and svt cobra uses the same pump and has the same...
Ok, as a lot of you know, the eco s/c reflash isn't able to be read or edited with HP Tuners...BUT that doesn't mean you can't still have the eco s/c...
The pump :http://www.racetronix.com/RX-F99-FPKG-2.html What you get with the pump kit: Your fuel pump sender: Where to start? Pry the...
What i did, as well as GM with their Stage 3 Cobalt SS kits, was reverse the lower two cores (as oriented when the manifold is on the engine). They...
you guys want to have some fun? hp tuner page (http://www.hptuners.com/forum/showthread.php?t=26232) for the lnf enine they just started...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
